A105 Class 150 Flanges

A105 Class 150 flange is affordable, versatile, and widely used in low-pressure, non-cryogenic applications. However, it is not suitable for high-pressure, low-temperature, or highly corrosive environments without additional protection.

150# a105 фланец приварной воротниковый

ASTM A105 Class 150 Flange Manufaturer

SSM производит ASTM A105 Class 150 flanges using high-quality forged carbon steel. These flanges are designed to provide reliable sealing and connection for pipelines and equipment in demanding applications. They are widely used in oil & gas, petrochemical, chemical processing, marine, and power generation industries.

Specifications of ASTM A105 Class 150 Flanges:

  • Диапазон размеров: 1/2″ to 24″ (DN15 to DN600)
  • Номинальное давление: Class 150 (working pressure up to ~285 psi at room temperature)
  • Facing Types: Raised Face (RF), Flat Face (FF), Ring Type Joint (RTJ)
  • Стандарты: ASME B16.5 (up to 24″), MSS SP-44 (large diameter), API 6A (oil & gas applications)
  • Материал: ASTM A105 Carbon Steel Forging
  • Типы: Weld Neck, Slip-On, Socket Weld, Lap Joint, Threaded, and Blind Flanges (with RF/FF/RTJ Facing)
Отправить запрос сейчас

ASTM A105 Class 150 Flange Dimensions (ASME B16.5)

ASME B16.5 Размеры фланцев класса 150

ASME B16.5 Размеры фланцев класса 150 в миллиметрах

ASME B16.5 Размеры фланцев класса 150 в дюймах

Отправить запрос сейчас

Advantages & Disadvantages of A105 Class 150 Flange

A105 Class 150 flanges are economical, widely available, and suitable for low- to medium-pressure applications in oil & gas, water, and general utility service.

However, they have limited pressure and temperature resistance, poor low-temperature toughness, and require protection against corrosion.

A105 Blind Flange Application

  • Нефте- и газопроводы
  • Water and steam lines
  • Refinery & chemical process piping
  • General utility service at low to medium pressures
Отправить запрос сейчас

One-Stop A105 Class 150 Flange Provider for All Your Needs

SSM has significant product advantages in manufacturing A105 Class 150 Flanges. Whether it’s quality or price, we will meet your needs.

Отправить запрос сейчас

More Information About A105 Class 150 Flange

Pressure Rating – Class 150

Класс 150 is a pressure-temperature rating defined by ASME B16.5.

It does not mean 150 psi exactly — the actual pressure capacity depends on material and temperature.

Для ASTM A105 (Group 1.1 material, carbon steel) under ASME B16.5:

  • At –29 °C to 38 °C (–20 °F to 100 °F), max working pressure ≈ 285 psi (≈ 19.6 bar).
  • Pressure rating decreases as temperature increases (e.g., ~260 psi at 200 °F, ~185 psi at 400 °F).

Common Types of A105 Class 150 Flanges

  • Фланец приварной воротниковый (WN) – for high integrity welded joints
  • Blind Flange (BL) – to close ends of piping systems
  • Накидной фланец (SO) – economical, easy to install
  • Фланец приварной враструб (SW) – for small-diameter, high-pressure service
  • Threaded Flange (THD) – for non-welded connections
  • Lap Joint Flange (LJ) – used with stub ends for easy disassembly

Часто задаваемые вопросы

  • Raised Face (RF) and Flat Face (FF) are most common. Ring Type Joint (RTJ) is generally used for higher-pressure classes, but it can also be specified.

No, A105 is not recommended below –20 °C. For cryogenic/low-temperature service, ASTM A350 LF2 or other low-temperature grades should be used.

Yes, carbon steel A105 is prone to corrosion. They are usually coated (black oxide, galvanization, painting) or protected with anti-rust oil during storage and transport.

With over 30 years of experience, SINO SPECIAL METAL (SSM) is a trusted manufacturer and supplier of ASTM A105 Class 150 flanges:

  • Production Capability: Specializes in carbon steel forged flanges (ASTM A105 / A105N), fully compliant with ASME / MSS standards.
  • Конкурентоспособные цены: Direct factory supply with cost-effective solutions for large-volume orders.
  • Quality Assurance: 100% PMI material testing, strict dimensional accuracy, and EN 10204 3.1/3.2 MTC certification available.
  • Fast Delivery: Standard Class 150 flanges in stock; customized orders delivered within 15–30 days.
  • Comprehensive Service: Third-party inspection, export-standard packaging, and worldwide delivery.

Choose ССМ for reliable, high-quality ASTM A105 Class 150 flanges – we look forward to being your trusted partner!

Сопутствующие товары

Обновить настройки файлов cookie
ru_RURU
ru_RURU en_USEN de_DEDE fa_IRFA id_IDID es_ESES fr_FRFR nl_NLNL
Прокрутить наверх