Om het gewicht van ASME B16.5-flenzen (inclusief Slip-On, Threaded, Socket Weld, Lap Joint, Blind en Weld Neck) te schatten, moeten het materiaal, de grootte en de drukklasse van de flens in overweging worden genomen. Het gewicht kan worden berekend op basis van het ontwerp en de afmetingen van de flens, zoals de buitendiameter (OD), dikte en materiaaldichtheid. Om het proces te vereenvoudigen, kan het gewicht van de flens ook worden geschat door te verwijzen naar een tabel.
ASME B16.5 Klasse 150 Flenzen Gewichtstabel (in kilogram)
| NPS | Aantrekken | Thd | Socket Weld | Overlapverbinding | Blind | Lasnek |
| 1/2 | 0.5 | 0.5 | 0.9 | 0.5 | 0.9 | 0.9 |
| 3/4 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 |
| 1 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 1.4 |
| 11/4 | 1.4 | 1.4 | 1.4 | 1.4 | 1.4 | 1.4 |
| 11/2 | 1.4 | 1.4 | 1.4 | 1.4 | 1.8 | 1.8 |
| 2 | 2.3 | 2.3 | 2.3 | 2.3 | 2.3 | 2.7 |
| 21/2 | 3.6 | 3.6 | 3.6 | 3.6 | 3.2 | 4.5 |
| 3 | 4.1 | 4.1 | 4.1 | 4.1 | 4.1 | 5.2 |
| 31/2 | 4 | 5.4 | 4 | 4 | 5.9 | 5.4 |
| 4 | 5.9 | 5.9 | 5.9 | 5.9 | 7.7 | 7.4 |
| 5 | 6.8 | 6.8 | 6.8 | 6.8 | 9 | 9.5 |
| 6 | 8.6 | 8.6 | 8.6 | 8.6 | 12.2 | 11.7 |
| 8 | 13.5 | 13.5 | 13.5 | 13.5 | 21.2 | 18.9 |
| 10 | 19.4 | 19.4 | 19.4 | 19.4 | 31.5 | 24.3 |
| 12 | 28.8 | 28.8 | 28.8 | 28.8 | 55.4 | 39.6 |
| 14 | 40.5 | 40.5 | 40.5 | 47.3 | 63 | 51.3 |
| 16 | 47.7 | 44.1 | 44.1 | 63 | 81 | 63 |
| 18 | 58.5 | 58.5 | 58.5 | 72 | 99 | 74.3 |
| 20 | 74.3 | 74.3 | 74.3 | 87.8 | 128.3 | 88.7 |
| 22 | 83.3 | 83.3 | 83.3 | 110.3 | 159.8 | 101.3 |
| 24 | 99 | 99 | 99 | 123.8 | 193.5 | 120.6 |
ASME B16.5 Klasse 300 Flenzen Gewichtstabel (in kilogram)
| NPS | Aantrekken | Thd | Socket Weld | Overlapverbinding | Blind | Lasnek |
| 1/2 | 0.9 | 0.9 | 1.4 | 0.9 | 0.9 | 0.9 |
| 3/4 | 1.4 | 1.4 | 1.4 | 1.4 | 1.4 | 1.4 |
| 1 | 1.4 | 1.4 | 1.4 | 1.4 | 1.8 | 1.8 |
| 11/4 | 2 | 2 | 1.8 | 2.1 | 2.7 | 2.3 |
| 11/2 | 2.9 | 2.9 | 2.7 | 2.9 | 3.2 | 3.2 |
| 2 | 3.2 | 3.2 | 3.2 | 3.2 | 3.6 | 4.1 |
| 21/2 | 4.5 | 4.5 | 4.5 | 4.5 | 5.4 | 5.4 |
| 3 | 5.9 | 6.3 | 5.9 | 6.5 | 7.2 | 8.1 |
| 31/2 | 7.7 | 7.7 | 7.7 | 7.7 | 9.5 | 9 |
| 4 | 10.6 | 10.8 | 9.9 | 10.8 | 12.6 | 11.9 |
| 5 | 13 | 13.9 | 12.6 | 12.6 | 16.7 | 16.2 |
| 6 | 17.6 | 17.6 | 17.6 | 17.6 | 22.5 | 20.3 |
| 8 | 26.1 | 26.1 | 26.1 | 26.1 | 36.5 | 31.1 |
| 10 | 36.5 | 36.5 | 36.5 | 40 | 55.8 | 45 |
| 12 | 51.8 | 51.8 | 51.8 | 63 | 83.3 | 63.9 |
| 14 | 74.3 | 74.3 | 74.3 | 85.5 | 112.5 | 92.7 |
| 16 | 94.5 | 99 | 85.5 | 105.3 | 141.8 | 112.5 |
| 18 | 113.9 | 126 | 112.5 | 137.3 | 186.3 | 144 |
| 20 | 141.8 | 146.3 | 141.8 | 168.8 | 231.8 | 180 |
| 22 | 166.5 | 166.5 | 166.5 | 195.8 | 288 | 209.3 |
| 24 | 220.5 | 220.5 | 213.8 | 247.5 | 360 | 261 |
ASME B16.5 Klasse 400 Flenzen Gewichtstabel (in kilogram)
| NPS | Aantrekken | Thd | Socket Weld | Overlapverbinding | Blind | Lasnek |
| 1/2 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 1.4 |
| 3/4 | 1.4 | 1.4 | 1.4 | 1.4 | 1.4 | 1.6 |
| 1 | 1.6 | 1.6 | 1.6 | 1.6 | 1.8 | 1.8 |
| 11/4 | 2 | 2 | 2 | 2 | 2.7 | 2 |
| 11/2 | 2.9 | 2.9 | 2.9 | 2.9 | 3.6 | 3.6 |
| 2 | 3.6 | 3.6 | 3.6 | 3.6 | 4.5 | 4.5 |
| 21/2 | 5.4 | 5.4 | 5.4 | 4 | 6.8 | 6.3 |
| 3 | 6.8 | 6.8 | 6.8 | 6.3 | 9 | 8.1 |
| 31/2 | 9.5 | 9.5 | 9.5 | 9 | 13 | 11.7 |
| 4 | 11.7 | 11.7 | 11.7 | 11.3 | 14.9 | 15.8 |
| 5 | 13.9 | 13.9 | 13.9 | 13 | 19.8 | 19.4 |
| 6 | 19.8 | 19.8 | 19.8 | 18.9 | 27.5 | 25.7 |
| 8 | 30.2 | 30.2 | 30.2 | 28.8 | 45 | 40.1 |
| 10 | 40 | 40 | 40 | 49.5 | 69.8 | 56.3 |
| 12 | 58.5 | 58.5 | 58.5 | 68.4 | 101.7 | 78.8 |
| 14 | 85 | 85 | 85 | 94.5 | 139.5 | 104.9 |
| 16 | 113.9 | 113.9 | 113.9 | 126 | 179.1 | 132.8 |
| 18 | 139.5 | 139.5 | 139.5 | 155.3 | 225.9 | 162 |
| 20 | 170.1 | 170.1 | 170.1 | 189 | 279.5 | 200.3 |
| 22 | 182.3 | 182.3 | 182.3 | 204.8 | 324 | 227.3 |
| 24 | 242.6 | 242.6 | 242.6 | 276.8 | 421.2 | 288 |
ASME B16.5 Klasse 600 Flenzen Gewichtstabel (in kilogram)
| NPS | Aantrekken | Thd | Socket Weld | Overlapverbinding | Blind | Lasnek |
| 1/2 | 0.9 | 0.9 | 0.9 | 0.9 | 1.4 | 1.4 |
| 3/4 | 1.4 | 1.4 | 1.4 | 1.4 | 1.8 | 1.8 |
| 1 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 |
| 11/4 | 2.3 | 2.3 | 2.3 | 2.3 | 2.7 | 2.7 |
| 11/2 | 3.2 | 3.2 | 3.2 | 3.2 | 3.6 | 3.6 |
| 2 | 4.1 | 4.1 | 4.1 | 4.1 | 4.5 | 5.4 |
| 21/2 | 5.9 | 5.9 | 5.9 | 5.4 | 6.8 | 8.1 |
| 3 | 7.2 | 7.2 | 7.2 | 6.8 | 9 | 10.4 |
| 31/2 | 9.5 | 9.5 | 9.5 | 9 | 13 | 11.7 |
| 4 | 16.7 | 16.7 | 16.7 | 16.2 | 18.5 | 18.9 |
| 5 | 28.4 | 28.4 | 28.4 | 28.4 | 30.6 | 30.6 |
| 6 | 36 | 36 | 36 | 35.1 | 38.7 | 36.5 |
| 8 | 51.8 | 51.8 | 51.8 | 50.4 | 63 | 54 |
| 10 | 79.7 | 79.7 | 79.7 | 87.8 | 103 | 85.5 |
| 12 | 96.8 | 96.8 | 96.8 | 108 | 132.8 | 101.7 |
| 14 | 116.6 | 116.6 | 116.6 | 130.5 | 170.1 | 156.2 |
| 16 | 164.7 | 164.7 | 164.7 | 180 | 237.2 | 216.5 |
| 18 | 214.2 | 214.2 | 214.2 | 211.1 | 299.3 | 249.8 |
| 20 | 275.4 | 275.4 | 275.4 | 271.8 | 384.8 | 310.5 |
| 22 | 265.5 | 265.5 | 265.5 | 301.5 | 450 | 324 |
| 24 | 394.2 | 394.2 | 394.2 | 389.7 | 562.5 | 439.7 |
ASME B16.5 Klasse 900 Flenzen Gewichtstabel (in kilogram)
| NPS | Aantrekken | Thd | Socket Weld | Overlapverbinding | Blind | Lasnek |
| 1/2 | 2.7 | 2.7 | 2.7 | 2.7 | 1.8 | 3.2 |
| 3/4 | 2.7 | 2.7 | 2.7 | 2.7 | 2.7 | 3.2 |
| 1 | 3.4 | 3.4 | 3.4 | 3.4 | 4.1 | 3.8 |
| 11/4 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 |
| 11/2 | 6.3 | 6.3 | 6.3 | 6.3 | 6.3 | 6.3 |
| 2 | 9.9 | 9.9 | 9.9 | 9.5 | 11.3 | 10.8 |
| 21/2 | 13.9 | 13.9 | 13.9 | 11.3 | 14.4 | 13.9 |
| 3 | 16.2 | 16.2 | 16.2 | 13 | 15.8 | 16.2 |
| 4 | 23.9 | 23.9 | 23.9 | 22 | 24.3 | 23.9 |
| 5 | 37.4 | 37.4 | 37.4 | 36.5 | 39.2 | 38.7 |
| 6 | 49.5 | 49.5 | 49.5 | 47.3 | 51.8 | 49.5 |
| 8 | 77.4 | 77.4 | 77.4 | 85.5 | 90 | 84.2 |
| 10 | 110.3 | 110.3 | 110.3 | 124.7 | 130.5 | 120.6 |
| 12 | 146.7 | 146.7 | 146.7 | 166 | 186.8 | 167.4 |
| 14 | 180 | 180 | 180 | 186.8 | 234 | 252.9 |
| 16 | 206.6 | 206.6 | 206.6 | 219.6 | 278.6 | 308.3 |
| 18 | 291.2 | 291.2 | 291.2 | 301.5 | 396 | 415.8 |
| 20 | 356.4 | 356.4 | 356.4 | 390.6 | 498.2 | 523.8 |
| 24 | 666 | 666 | 666 | 746.6 | 944.6 | 948.2 |
ASME B16.5 Klasse 1500 Flenzen Gewichtstabel (in kilogram)
| NPS | Aantrekken | Thd | Socket Weld | Overlapverbinding | Blind | Lasnek |
| 1/2 | 2.7 | 2.7 | 2.7 | 2.7 | 1.8 | 3.2 |
| 3/4 | 2.7 | 2.7 | 2.7 | 2.7 | 2.7 | 3.2 |
| 1 | 3.6 | 3.6 | 3.6 | 3.6 | 4.1 | 4.1 |
| 11/4 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 |
| 11/2 | 6.3 | 6.3 | 6.3 | 6.3 | 6.3 | 6.3 |
| 2 | 11.3 | 11.3 | 11.3 | 11.3 | 11.3 | 11.3 |
| 21/2 | 16.2 | 16.2 | 16.2 | 15.8 | 15.8 | 16.2 |
| 3 | 21.6 | 21.6 | 21.6 | 21.2 | 21.6 | 21.6 |
| 4 | 32.9 | 32.9 | 32.9 | 33.8 | 32.9 | 32.9 |
| 5 | 59.4 | 59.4 | 59.4 | 63 | 63 | 59.4 |
| 6 | 74.3 | 74.3 | 74.3 | 76.5 | 72 | 74.3 |
| 8 | 117 | 117 | 117 | 128.7 | 135.9 | 123.8 |
| 10 | 196.2 | 196.2 | 196.2 | 218.3 | 229.5 | 204.8 |
| 12 | 300.2 | 300.2 | 300.2 | 337.1 | 348.8 | 310.5 |
| 14 | 423 | 423 | 423 | 400.5 | 438.8 | 423 |
| 16 | 562.5 | 562.5 | 562.5 | 562.5 | 585 | 562.5 |
| 18 | 731.3 | 731.3 | 731.3 | 663.8 | 787.5 | 731.3 |
| 20 | 922.5 | 922.5 | 922.5 | 798.8 | 1001 | 922.5 |
| 24 | 1271 | 1271 | 1271 | 1271 | 1631 | 1496 |
ASME B16.5 Klasse 2500 Flenzen Gewichtstabel (in kilogram)
| NPS | Aantrekken | Thd | Socket Weld | Overlapverbinding | Blind | Lasnek |
| 1/2 | … | 3.2 | … | 3.2 | 3.2 | 3.6 |
| 3/4 | … | 4.1 | … | 3.6 | 4.5 | 4.1 |
| 1 | … | 5.4 | … | 5.4 | 5.4 | 5.9 |
| 11/4 | … | 8.1 | … | 7.7 | 8.1 | 9 |
| 11/2 | … | 11.3 | … | 10.8 | 11.3 | 12.6 |
| 2 | … | 17.1 | … | 16.7 | 17.6 | 18.9 |
| 21/2 | … | 24.8 | … | 23.9 | 25.2 | 23.4 |
| 3 | … | 37.4 | … | 36 | 38.7 | 42.3 |
| 4 | … | 57.2 | … | 54.9 | 59.9 | 65.7 |
| 5 | … | 94.5 | … | 91.8 | 100.4 | 109.8 |
| 6 | … | 145.4 | … | 141.3 | 155.3 | 170.1 |
| 8 | … | 218.3 | … | 211.9 | 239.8 | 259.2 |
| 10 | … | 416.3 | … | 403.7 | 461.3 | 480.6 |
| 12 | … | 585 | … | 567.9 | 658.8 | 723.6 |
SSM is een betrouwbare fabrikant van ASME B16.5-flenzen en biedt hoogwaardige producten die voldoen aan de hoogste industrienormen. Als betrouwbare leverancier bieden wij een breed scala aan flenstypen, waaronder slip-on, schroefdraad, socket weld, lap joint, blind en weld neck, allemaal vervaardigd met precisie en duurzaamheid. Of u nu flenzen nodig heeft voor industriële, commerciële of gespecialiseerde toepassingen, ons team streeft naar uitzonderlijke service en garandeert uw tevredenheid. Neem vandaag nog contact met ons op om uw wensen te bespreken en te ontdekken hoe SSM uw vaste leverancier kan zijn voor ASME B16.5-flenzen van topkwaliteit.
NL 
EN 
DE 
RU 
FA 
ID 
ES 
FR